How to refurb alloy wheels

Plus Finance Now Available. Speak To Our Specialists Today. What is alloy wheel refurbishment? Alloy Wheels Brands. Where to refurbish Wicked Wheels? Remove the tyres Deflate the tyres and break the bead, ( push the rubber away from the edge of the rim ).

Mask them up with paper and masking tape. It’s best to take the tyres and valves off completely but not essential. It’s checked for cracks, washed off and then primed. It’s rechecke then painted and the wheel baked at 200deg F before, finally, being lacquered and baked again at 230deg F. At the end of it all, Lepsons claims you have a set of wheels as good as the day they left the factory.

Take them to a place that does wheel refurb. Tips for using an alloy wheel repair kit Wet your sandpaper. You could do a refurb. Keep rinsing it in more.

Test the paint on a piece of paper before you apply it to your wheels. Remove the alloy wheel rim from the tire. The putty filler can. Place the tire onto a flat surface with the rim facing upward.

Sit on the edge of the wheel and insert a tire iron between the wheel and the rim at the farthest location from you with the curved side facing down. With the tire iron facing upwar pull backward until the rim pops out from the wheel. How much to refurbish alloy wheels if you DIY?

Scrub them back to basics. This is video is the. Scrape and sand down to a smooth finish. Level off your wheels ’ surface with some wire wool, wet and dry or a Scotch.

Before spray filling, make sure the wheel is clean. I again cleaned the whole wheel with warm water and detergent, and then rinsed and dried thoroughly with a microfiber cloth. Once the wheel is totally dry you can start spraying the spray filler. Free Shipping Available.

Money Back Guarantee! Chemical stripping. Sandblasting and sanding preparation.

Heated in oven to prepare for painting. Left to cool and dry. Tyres fitted and balanced. When the professional refurbishes your alloy wheels, the tyres will be taken off the wheels.

Stripping the wheel of the existing finish must be done prior to any work. Place your alloy wheel rim onto the wheel on a stable flat surface. Place a piece of cardboard down and then place your tire on top of it. To hold the alloy wheel in place, place it on top of the tire and push it down so it inserts slightly into the center hole.

For heavy curbing you probably will, while light curbing may only. Firstly i had the tyres off the wheels to make it easier and save my the hastle of masking up the tyres.

How to refurb alloy wheels at home. Once cleaned off start by getting some 1grade sandpaper2. Get yourself a rubbing block3. Powder coating is a service which is used to change the colour of the alloy wheel, or refurbish a wheel using colour matching.

Next the wheels are gently heat treated to remove any air from the alloy and a first stage powder coat finish is applied and then cured for a set time period. A second coating may be applied at this stage depending on what finish is chosen.