How to fit number plates

How do you fix a number plate? What is the best way to make a number plate? Can you drill holes in New number plates? Should I pay for a personalised number plate?

If you are fitting your number plate with screws, you will need to drill holes into it. There are a couple of ways to do so, and there are mixed opinions on what the best way is.

Place the number plate on a piece of scrap wood and then carefully drill each hole through the plate in one go. Clean any plastic swarf from the holes. Hold the new number plate in place.

If you have new screws that will fit the existing mounting holes then use them to secure the new plates in place, otherwise reuse the old screws. Place at least four double sided sticky strips onto the back of your number plate and then peel back the other side of the tape. Firstly if this is a reasonably new car you will need new plates, they are designed to break if pulled off. Second you will need to secure the number plate surround to the car with some form of screw or bolt.

Includes how to drill and fit without damaging the delicate reflec.

Remove the caps on your existing plate. Unscrew the screws affixing the old plates. Then lay the new plates face down and the old ones on top – drill through the holes and into your new plates.

When you receive brand new number plates, you may need to drill holes in them for screws before you can fit them onto your car. Simply lay your old plates precisely over the new plates. The cleaner the surface, the better the chances of proper adhesion. Attach at least four strips of tape to the back of the number plate and peel back the exposed surface of the tape.

Align the plate with the cleaned surface and hold it in place for 2-minutes. Take the car for a quick drive around the block to ensure that it stays in place. If you are using screws to fit your replacement number plates then you need a lesson in drilling number plates. Drilling number plates is actually very simple, though some people make one simple error that can ruin them.

We recommend using a 5mm drill bit, and make sure that you drill the number plates from the rear, rather than the front. How to fit new or replacement number plates to a vehicle using screws. Learn how to drill the holes in the correct position. Works for both car and motorcycl.

You can keep the original registration number and plates - they’ll be reassigned to. Fix the plate to your vehicle using the screws – tighten to. Stick the pads to the rear of your number plate.

For the most secure fit, use more pads, but bear in mind that the plate will then become more difficult to remove in future. When you’re ready to place the plate, remove the backing paper from the car side of the pads and manoeuvre the plate into just the right position. Hello there guys today im going to show you how to fit your Number Plate by your self, and this is an easy way of doing it, all you need is a drill and a HSS.

Here are some simple instructions on how to secure your number plates to your vehicle Now if your old number plate is held on by screws- 1. Don’t worry its really easy. We have a range of number plate fitting kits, each one is. If your application is successful you should fit new number plates as soon as possible. This can be used to purchase new number plates without waiting for the replacement V5C (log book) to arrive by post.

You won't receive the actual number plate in the post, so you'll need to take proof of your identity such as a driving licence, along with the V75 to your nearest registered number plate supplier. They will make up the plate for you and fit it to your vehicle. Step – Fit Using Screws. There are strict rules governing the correct display of registration plates.

Go to halfords and ask for some number plate adhesive strips. They are much stronger than the usual strips. You will only get one chance to put them on a they stick instantly.